|
|
The series of MTS karts is
identified with the initials "SC"
|
RX32-SC / CRX32-SC
(Homologation nr. 79/CH/11) |
This
kart is born from the R32-ST evolution with particular
modifications done to the central and rear crossbar to obtain
better balancing as well as improving the performance. An
extra novelty is given to the new support axle bearing that
allows you to adjust the wheelbase in two different positions:
1040mm standard series or 1054mm for an alternative position.
This new possibility of adjusting the wheelbase will give you an
additional advantage for the adaptability to different tracks
and conditions. |
|
MX32-SC / CMX-SC
(Homologation nr. 78/CH/11) |
The M
Series has undergone some small but important modifications.
With this evolution the kart obtains optimal balancing with an
increased performance confirmed by the victories obtained this
year. The kart model will also be equipped with the new
support axle bearing to adjust wheelbase: 1040mm or 1054mm. |
|
R31-SC / CR31-SC
(Homologation nr.147/CH/08R) |
To
better improve the balancing and driving aspect of the R31 it
has undergone geometrical modifications that give high
adaptability adjusting to different types of tires. |
|
MC31-SC / CM31-SC
(Homologation nr. 144/CH/08) |
This
kart was homologated in 2003, never utilized for the races
and/or put on the market. During 2005 it was developed to
optimize its function and performance which has given optimal
results, therefore we think it is a valid alternative to the
other models offered in our line and taking in consideration the
high adaptability adjusting to different types of ties. |
In addition, the kart novelties will have a
new "spindle support C" which makes the kart sturdier, more rigid
thus improving the stability, results in easier curving and driving.
All 100cc karts only mentioned above will
mount a new design not only for the aspect of the kart but it serves
to improve the performance.
For the new homologated karts
with the letter
"X" identifies the assembly of the new support axle
bearing with the adjustable wheelbase that distinguishes the
principle characteristics from the new homologation to the previous
ones. As you are able to
notice in our pricelist, we have included a new kart, CM32-RX, which is
a product based from CM32 with all the necessary characteristics to be
used with the Rotax RM1 for the Rotax category. |
|
